
Following the predefined industry quality standards, our organization is involved in manufacturing and supplying a premium range of Tungsten Alloy Counterweight. It is used as source holders for oil-well logging to shield the radioactive source and to act as a collimator for the gamma beam. Besides, tungsten sinker bar or tungsten stem bar is also used to balance the huge equipment for logging. Tungsten Alloy Counterweight is also used in applications such as weights in sailboats, submarines, yacht and other vessels, racing weights and fishing sinkers.
The Tungsten Alloy Counterweight has two components that include tungsten stem and tungsten weight. The tungsten sinker bar or tungsten stem has extensive utilization in geologging work that has wide utilization in gas and oil industries. Basically this item is required for trouble free lifting of tool during flowing gradient survey work by offering required additional weight to toolstring. It also acts as a good replacement of additional weight for higher pressure works. During oil well logging, this tungsten item is utilized as a source holder to safeguard radioactive source by serving as the collimator for gamma beam. On the other hand, the tungsten weight is known for its Eco friendly nature and is considered as a good substitute of hazardous lead weight. It is more heavy than its steel counterpart and has higher density level. Being 30% smaller than lead weight, its original shape remains intact for longer period. We are a renowned manufacturer of standard grade Tungsten Alloy Counterweight.Features
Application
Technical Specification :
Tungsten Heavy Metal Grade Chart | |||||||
MIL-T-21014 Rev D | Class 1 | Class 2 | Class 3 | Class 4 | Class 1 | Class 2 | Class 3 |
SAE-AMS-T-21014 | Class 1 | Class 2 | Class 3 | Class 4 | Class 1 | Class 2 | Class 3 |
ASTM B777-07 | Class 1 | Class 2 | Class 3 | Class 4 | Class 1 | Class 2 | Class 3 |
AMS 7725 C | 7725 C |
|
|
| 7725 C |
|
|
Matrix (wt. %) | 90.0% W | 92.5% W | 95.0% W | 97.0% W | 90.0% W | 92.5% W | 95.0% W |
Binder (wt. %) | 10.0% Ni-Fe | 7.5% Ni-Fe | 5.0% Ni-Fe | 3.0% Ni-Fe | 10.0% Ni-Cu | 7.5% Ni-Fe | 5.0% Ni-Cu |
Nominal Density (g/cm3) | 16.85-17.25 | 17.15-17.85 | 17.75-18.35 | 18.25-18.85 | 16.85-17.25 | 17.15-17.85 | 17.75-18.35 |
Nominal Density (lb/in3) | 0.614 | 0.632 | 0.650 | 0.668 | 0.614 | 0.632 | 0.650 |
Typical Hardness (Rc) | 26 | 26 | 28 | 30 | 26 | 26 | 28 |
Ultimate Tensile Strength - Min. (psi) | 110,000 | 110,000 | 105,000 | 100,000 | 94,000 | 110,000 | 94,000 |
0.2% Offset Yield Strength - Min. (psi) | 75,000 | 75,000 | 75,000 | 75,000 | 75,000 | 75,000 | 75,000 |
Magnetic Characteristics | Slightly magnetic | Slightly magnetic | Slightly magnetic | Slightly magnetic | Nonmagnetic | Nonmagnetic | Nonmagnetic |
|
|
![]() |
ZHUZHOU JIABANG REFRACTORY METAL CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |